• Formulated for trowel filling wood floors • Dries quickly • Accepts stains • Can be sanded within 30 to 60 minutes   MSDS

WF - 800 RED OAK
WF - 810 WHITE OAK
WF - 820 MAPLE
WF - 830 WALNUT
WF - 840 BRAZILIAN CHERRY

Technical Data:
USES: Precision Full Trowel Wood Filler is a waterbased wood filler specifically designed for trowel filling cracks, holes and open grain of wood flooring.

PRIOR TO APPLICATION: Sand floor to bare wood according to NWFA/NOFMA specifications. Be sure to vacuum all dirt, sawdust, etc. from cracks before applying Precision Full Trowel Wood Filler or Precision Wood Patch.

TIPS:
Always wear a properly fitted mask when sanding.
Keep from freezing.
DO NOT bleach.
*Low temperatures and/or high humidity will retard drying.

APPLICATION: Apply Precision Full Trowel Wood Filler after the first sanding of the floor. Pour a workable puddle of filler on the floor. With a smooth edge trowel or spatula, work the filler into the cracks and holes leaving no excess on the surface. For best results, larger cracks and holes may need an additional application. Always allow proper drying time between layers.

DRYING TIME: 30 to 60* minutes. Once dry, proceed with sanding. For best results, the room and the product should be between 60ºF to 90ºF. Be sure to remove all excess filler from the surface of the floor.

CLEAN UP: Clean applicators and equipment using soap and water.

PACKAGING:
Gallon 4/Case
3.5 Gallon 1/Case

TECHNICAL DATA
INGREDIENTS: Contains: Calcium carbonate, crystalline silica, vinyl acetate. SPECIFIC GRAVITY: 1.4 VOC: NA
BOILING POINT: 212ºF VAPOR DENSITY: NA FLASH POINT: None PERCENTILE VOLATILE BY WEIGHT: 25-28%
FREEZE / THAW: Stable FLAMMABILITY CLASSIFICATION: Non-flammable PERCENT SOLIDS: 72-75%
STORAGE: Keep from freezing. Keep container closed while not in use.